Avion A-I6ii

Order Enquiry

The A-16II Personal Mixer is a 16-channel stereo digital mixer designed to allow performers to create custom monitor mixes on stage or in the studio. The stereo output on the A-16II can drive in-ear monitors (IEMs) or headphones. Its intuitive interface lets a performer quickly modify a mix without distracting from the primary job at hand—performing live or in the studio.

A-16II mixers are known as the industry standard worldwide, and for good reasons: they’re robust, simple to use, and sound great. Just connect an A-16II to an analog input module or digital console card to start a system. It’s that easy.


Product Details

Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, as well as master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.

Stereo Output for Wired or Wireless IEMs

The TRS stereo output from the A-16II can be used as a line-level output to drive wired or wireless in-ear monitors (IEMs), headphones, powered floor wedges, an amplifier, or spot monitors.

The A-16II Personal Mixer is fully compatible with all Pro16® Series products, including Aviom’s Y1 A-Net card for Yamaha® digital mixing consoles. Support for the industry standard Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers (including Avid® (Digidesign®), DiGiCo®, Soundcraft®, Innovason®, Tascam®). Many other digital console manufacturers offer a Pro16 A-Net output option.

Power Over Cat-5

Personal Mixers can be daisy chained or connected in parallel using an A-Net Distributor. Parallel connections also allow DC power to be supplied to the mixers over the Cat-5e cable. The A-16II supports Cat-5e cable runs of up to 500 feet (150 meters) between devices, and there is no practiacal limit to the number of personal mixers in a system.


Note: The A-16II Personal mixer does not ship with a power supply since most system configurations include an A-Net Distributor that supplies power to the Personal Mixers. Order the PS-120 if you need an external power supply or if you are using the A-16D A-Net Distributor which utilizes external power supplies for each port.


All Pro16 Personal Mixers, including the A-16II, A-16R, and A360, can be used in any combination when creating a personal mixing system.

Adding an ASI A-Net Systems Interface to a Pro64 network allows a Personal Mixer to output any 16 channels from a Pro64 digital snake or audio network.


  • 16-channel stereo mixer with fully adjustable pan per channel
  • Sixteen Preset locations for storing custom mixes
  • Channel solo, mute, and group functions
  • Intuitive interface with no menus or screens to navigate


A-16II Technical Specifications

Audio Output 1/4-inch TRS stereo, headphone or line level
Line/Headphone TRS Output Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
Auto-detects mono plugs
A-Net Input/Output 1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)
Digital to Analog Conversion Bit Depth 24 bit
Signal to Noise Ratio (Referenced to 0dB) -103dB
Latency <0.880 msec (measured from analog input to analog output)
Pro16 A-Net Uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
Tone Controls Treble +/-12dB at 9kHz shelving
Bass +/-12dB at 160Hz shelving
Maximum Levels (RMS) Line/Headphone outs: 1.0 watt at 100 ohms
Impedance Line/Headphone outs: 32 ohms
Power Supply 
Input Voltage
Output Voltage
Plug Size
External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm
Dimensions 10.75″ (273 mm) wide x 5.6″ (142.2 mm) deep;
2.25″ (57.5 mm) high
Weight 3.4 lb (1.54 kg)
Options MT-1 (discontinued) or MT-1a Mic Stand Mount (uses 6-32 1/4-inch screws)
EB-1 Extension Bracket
MT-X Expansion Box
PS-120 Power Supply


    Download PDF FileDownload PDF File